ZINC CHLORIDE DRY PURIFIED
SKU: RXSOL-60-6605-839
Category: Electro Plating Chemicals-72
Zinc chloride is used a flux for the soldering process. It is also used in the manufacture of magnesia cement, which is used as an active ingredient for dental fillings and mouthwashes. 4. Printing and Textile industry - Around 64% zinc chloride in water is used to dissolve silk, cellulose and starch.
Read full description →
Email: soharchemical@gmail.com
Zinc chloride is used a flux for the soldering process. It is also used in the manufacture of magnesia cement, which is used as an active ingredient for dental fillings and mouthwashes. 4. Printing and Textile industry - Around 64% zinc chloride in water is used to dissolve silk, cellulose and starch.
Zinc Chloride is a chemical compound, composed of zinc and chlorine. It is a colourless liquid and it exhibits hygroscopic qualities, i.e., it attracts and captures the water molecule present in the environment. It is mildly corrosive towards metals. It is an ionic salt that is essential for the synthesis of protein, fats, and cholesterol. It may cause burns to the eyes, skin, and mucous membranes.
Uses of Zinc Chloride
Zinc Chloride finds its application in different industries including pharmaceuticals, health care, paper manufacturing industry. Chemical products are also made from zinc chloride.
Organic Product Synthesis - Organic products are synthesized in the laboratory for the preparation of Lewis acid reaction and various other organic reactions. It can be used as a catalyst in organic processes.
Metallurgical Industry - It is used as a flux in the soldering process and cleaning agent. It is also used in the manufacturing of magnesia cement.
Chemical Industry - Zinc chloride finds its application in the manufacture of various dyes, intermediate chemicals, and solvents like ethyl acetate. It is found in antiseptic mouthwash products.
Printing and Textile Industry - About 64% of zinc chloride in water can be used to dissolve silk, cellulose, and starch.
Petroleum - Zinc chloride is used as an emulsion breaker, which can separate oil from water.
Zinc chloride is used in dry cells as an electrolyte.
Other Uses - It is used as a condensing agent, disinfecting purposes, dehydrating agent, wood preservative, deodorant, and disinfectant.
A mixture of zinc oxide and hexachloroethane can be used in smoke grenades. While igniting, these compounds react with each other to form a smoke of zinc chloride, which serves as a smokescreen.
The Lucas reagent used is a solution of anhydrous zinc chloride and concentrated hydrochloric acid. This reagent is useful in preparing alkyl chlorides.
Zinc chloride is used as an alternative medicine for the cause of dead tissue, to cure skin cancers.
Dilute aqueous zinc chloride was used as a disinfectant under the name "Burnett's Disinfecting Fluid". From 1839 Sir William Burnett promoted its use as a disinfectant as well as a wood preservative.
Physical Properties of Zinc Chloride
Zinc Chloride formula: ZnCl2.
Molecular Weight of Zinc Chloride: 136.315 gms/ mole
The boiling point of Zinc Chloride is - 732 °C
The Melting point of Zinc Chloride is - 290 °C
Its density is 2.907.
It forms white, odourless, very deliquescent granules.
Molten zinc chloride is viscous in nature and has a relatively low electrical conductivity.
Zinc chloride is used in dry cells as an electrolyte. Other Uses - It is used as a condensing agent, disinfecting purposes, dehydrating agent, wood preservative, deodorant, and disinfectant. A mixture of zinc oxide and hexachloroethane can be used in smoke grenades.
CHEMICAL VALUABLE WORD :
ACGIH is the American Conference of Governmental Industrial Hygienists. It recommends upper limits (called TLVs) for exposure to workplace chemicals.
ACGIH is the American Conference of Governmental Industrial Hygienists. It recommends upper limits (called TLVs) for exposure to workplace chemicals.
A carcinogen is a substance that causes cancer.
The CAS number is assigned by the Chemical Abstracts Service to identify a specific chemical.
A combustible substance is a solid, liquid or gas that will burn.
A corrosive substance is a gas, liquid or solid that causes irreversible damage to human tissue or containers.
DEP is the Department of Environmental Protection.
DOT is the Department of Transportation, the federal agency that regulates the transportation of chemicals.
EPA is the Environmental Protection Agency, the federal agency responsible for regulating environmental hazards.
A fetus is an unborn human or animal.
A flammable substance is a solid, liquid, vapor or gas that will ignite easily and burn rapidly.
The flash point is the temperature at which a liquid or solid gives off vapor that can form a flammable mixture with air.
HHAG is the Human Health Assessment Group of the federal EPA.
IARC is the International Agency for Research on Cancer, a scientific group that classifies chemicals according to their cancer-causing potential.
A miscible substance is a liquid or gas that will evenly dissolve in another.
mg/m3 means milligrams of a chemical in a cubic meter of air. It is a measure of concentration (weight/volume).
A mutagen is a substance that causes mutations. A mutation is a change in the genetic material in a body cell. Mutations can lead to birth defects, miscarriages, or cancer.
NAERG is the North American Emergency Response Guidebook. It was jointly developed by Transport Canada, the United States Department of Transportation and the Secretariat of Communications and Transportation of Mexico. It is a guide for first responders to quickly identify the specific or generic hazards of material involved in a transportation incident, and to protect themselves and the general public during the initial response phase of the incident.
NCI is the National Cancer Institute, a federal agency that determines the cancer-causing potential of chemicals.
NFPA is the National Fire Protection Association. It classifies substances according to their fire and explosion hazard.
NIOSH is the National Institute for Occupational Safety and Health. It tests equipment, evaluates and approves respirators, conducts studies of workplace hazards, and proposes standards to OSHA.
NTP is the National Toxicology Program which tests chemicals and reviews evidence for cancer.
OSHA is the Occupational Safety and Health Administration, which adopts and enforces health and safety standards.
PEL is the Permissible Exposure Limit which is enforceable by the Occupational Safety and Health Administration.
PIH is a DOT designation for chemicals which are Poison Inhalation Hazards.
ppm means parts of a substance per million parts of air. It is a measure of concentration by volume in air.
A reactive substance is a solid, liquid or gas that releases energy under certain conditions.
A teratogen is a substance that causes birth defects by damaging the fetus.
TLV is the Threshold Limit Value, the workplace exposure limit recommended by ACGIH.
The vapor pressure is a measure of how readily a liquid or a solid mixes with air at its surface. A higher vapor pressure indicates a higher concentration of the substance in air and therefore increases the likelihood of breathing it in.
The purification of anhydrous zinc chloride can be done through sublimation with hydrogen chloride gas, followed by the subsequent heating of the sublimate to around 400 °C with dry nitrogen gas. Zinc chloride can also be purified by treating it with thionyl chloride.
Zinc and Its Doses
Infants and Children: When taken by mouth properly in the prescribed quantities, zinc is likely Healthy. When used in high concentrations, zinc is Dangerous.
Pregnancy and Breast-Feeding: Zinc is likely safe when used in the prescribed daily quantities for most pregnant and breast-feeding women (RDA). Zinc, however, is potentially unsafe when used by breast-feeding women at high doses and likely unsafe when used by pregnant women at high doses. Not more than 40 mg of zinc should be taken per day by pregnant women over the age of 18, no more than 34 mg per day should be taken by pregnant women aged 14 to 18 years. No more than 40 mg of zinc per day should be taken by breastfeeding women over the age of 18, no more than 34 mg per day should be taken by breastfeeding women aged 14 to 18.
Alcoholism: Excessive, long-term consumption of alcohol is related to low absorption of zinc in the body.
Kidney Disease: The risk of having kidney disease rises with low zinc in the diet. People with hemodialysis kidney disease are also at risk for zinc deficiency and may need zinc supplements.
Vegetarianism: Vegetarian diets are often associated with lower absorption of zinc. This form of diet is also seen as a risk factor for the depletion of zinc. But in the long term, the body adapts. Zinc absorption and zinc loss elimination are getting stronger.
Keywords
There are nine different crystalline forms of zinc chloride which are currently known. These hydrates of Zinc chloride are highly soluble in water.
Zinc Chloride Structure
A molecule of zinc chloride has an ionic bond between the zinc cation (Zn2+) and the chloride anions (Cl-).
Zinc chloride which is a colourless liquid is responsible for causing burns to the mucous membrane, eyes or skin, and also corrosive to metals. The molecular formula for zinc chloride is ZNCL2 or CL2ZN.
Zinc chloride is also known as zinc dichloride, butter of zinc, zinc(II)chloride. The molecular weight of the zinc is 136.3.
Zinc chloride is mildly corrosive to metals and causes burns to the eyes, mucous membrane and skin.
Zinc chloride is a compound that can be prepared by a direct reaction, or by evaporating the aqueous solution formed in various reactions. Zinc chloride has nine different crystalline forms that are currently known. These hydrates of zinc chloride are mainly colourless or white in colour and all of them have a high solubility rate in water. Zinc chloride attracts the water molecules in its environment and therefore it can be said that it has hygroscopic qualities.
Chemical Properties of Zinc Chloride
When ZnCl2 is dissolved in water, the solution becomes acidic. The pH of this aqueous solution of zinc chloride having a concentration equals 6M is approx 1.
After heating, the hydrated form of zinc chloride loses water and small quantities of ZnCl(OH) are obtained.
Zinc Chloride is soluble in water, glycerol, ether, and alcohol.
Zinc chloride is deliquescent in nature, so it should be protected from sources of moisture (water vapour).
Preparation of Zinc Chloride
The reaction between Zinc and hydrogen chloride gives an anhydrous form of zinc chloride. The chemical equation is given below:
Zn + 2HCl → ZnCl2 + H2
Hydrochloric acid reacts with zinc sulphide to form zinc chloride and hydrogen sulphide. The chemical equation is given by:
ZnS + 2HCl → ZnCl2 + H2S
There are some impurities present in zinc chloride samples due to the process of hydrolysis. The purification of chloride is simple due to its oxidation state Zn as +2. Purification can be done by recrystallization from hot dioxane. The purification of anhydrous zinc chloride can be done through sublimation with HCl gas, followed by the subsequent heating of the sublimate to around 400 °C with dry nitrogen gas. It can also be purified by treating it with thionyl chloride.
Supply in Sohar & across Oman
Sohar Chemicals supplies ZINC CHLORIDE DRY PURIFIED to customers in Sohar, Sohar Port & Freezone, Liwa, Shinas, Saham, Barka, Muscat and across Oman, from our stock in Barka.
Bulk and small orders welcome. Contact us for price, availability, MSDS and TDS.
Need ZINC CHLORIDE DRY PURIFIED in Sohar?
Get a quick quote with MSDS, packing options and delivery across Sohar and Oman. Bulk and small orders welcome.
