Mould Lubrication Oil
RXSOL Mould Lubrication Oil is a specially formulated industrial lubricant designed to provide effective lubrication between mould surfaces and the material being processed. It forms a thin, uniform lubricating film that helps minimize friction, sticking and material adhesion during moulding operations. The product facilitates smooth mould release…
Read full description →RXSOL Mould Lubrication Oil is a specially formulated industrial lubricant designed to provide effective lubrication between mould surfaces and the material being processed. It forms a thin, uniform lubricating film that helps minimize friction, sticking and material adhesion during moulding operations.
The product facilitates smooth mould release, reduces surface defects and helps maintain the cleanliness of mould surfaces. Its lubricating properties help reduce wear caused by repeated moulding cycles and contribute to improved operational efficiency.
It is suitable for industrial moulding applications where controlled lubrication and easy release of finished products are required.
Key Features of Mould Lubrication Oil
- Effective Lubrication: Creates a lubricating film on mould surfaces to minimize friction.
- Easy Mould Release: Helps prevent sticking and facilitates removal of moulded products.
- Surface Protection: Helps reduce direct contact and wear between moulding surfaces.
- Reduced Surface Defects: Promotes smoother release and helps minimize surface damage.
- Operational Efficiency: Supports consistent moulding operations and reduces cleaning frequency.
- Mould Conditioning: Helps maintain mould surfaces during repeated production cycles.
|
Parameter |
Specification |
Test Method |
|---|---|---|
|
Appearance |
Clear, homogeneous liquid |
Visual |
|
Colour |
Pale yellow to amber |
Visual |
|
Odour |
Mild petroleum odour |
Organoleptic |
|
Density @ 15°C |
0.850-0.890 g/cm³ |
ASTM D4052 |
|
Specific Gravity @ 15°C |
0.850-0.890 |
ASTM D4052 |
|
Solubility in Water |
Insoluble |
Visual |
|
Corrosive Properties |
Non-corrosive under normal application conditions |
ASTM D130 |
Areas of Application
- Industrial mould lubrication.
- Concrete moulds and formwork applications, subject to substrate compatibility.
- Precast concrete moulds.
- Cement product manufacturing.
- Industrial casting and moulding operations.
- Mould surfaces requiring lubrication and release assistance
How to use Mould Lubrication Oil?
Step 1 - Surface Preparation
- Ensure the mould surface is clean and free from concrete deposits, dust, rust and other contaminants.
- Remove any residual hardened material before applying the lubricant.
Step 2 - Application
- Apply RXSOL Mould Lubrication Oil directly onto the mould surface using a spray gun, brush, roller or clean cloth.
- Spread evenly to form a thin, continuous lubricating film.
- Avoid excessive application and accumulation of oil in corners or depressions.
Step 3 - Moulding Operation
- Allow the applied film to distribute uniformly over the mould surface.
- Proceed with the moulding or casting operation as per the production process.
- Ensure that excess oil is removed before introducing the moulding material.
Step 4 - Maintenance
- Clean the mould after each production cycle, where necessary.
- Reapply the lubricant before the next moulding operation.
Get highly effective Mould Lubrication Oil in Dubai, Sharjah, Ras Al Khaimah, Umm Al Quwain, Abu Dhabi, Fujairah UAE. Mould Lubrication Oil supplier in Muscat, Sohar, Duqm, Salalah, OMAN.
Supply in Sohar & across Oman
Sohar Chemicals supplies Mould Lubrication Oil to customers in Sohar, Sohar Port & Freezone, Liwa, Shinas, Saham, Barka, Muscat and across Oman, from our stock in Barka.
Bulk and small orders welcome. Contact us for price, availability, MSDS and TDS.
Need Mould Lubrication Oil in Sohar?
Get a quick quote with MSDS, packing options and delivery across Sohar and Oman. Bulk and small orders welcome.
