Emulsifier SOPEP
Oil spills at sea, harbours, beaches, or on land. Can also be used in industries. Bio-degradable Emulsifier with excellent efficiency and low toxicity with superior penetration. This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place. APPLICATION :Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.
Emulsifier SOPEP is a high-performance oil spill emulsifying agent specially formulated to disperse hydrocarbons into fine emulsions, enabling easy removal or biodegradation. It rapidly penetrates oil films and breaks them into microscopic droplets that mix with water and disperse effectively.
The product is widely used for cleaning oil spills on ships, docks, harbors, offshore platforms, beaches, and industrial surfaces. It is effective against a wide range of petroleum products including crude oil, diesel, fuel oil, lubricants, and kerosene.
The formulation typically consists of biodegradable surfactants, emulsifying agents, and low-toxicity solvents designed to disperse oil while minimizing environmental impact.
Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) .
HIGH – Emulsification rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crude / Bitumen / Residual / Diesel / Kerosene, White spirit & Lube oils etc .Effective on oil spills at platefoprm , during loading or discharging of cargo or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed .
| Appearance | Clear liquid |
| Color | Colorless |
| Odor | Odorless |
| Initial Boiling Point | |
| Final Boiling Point | >262oC |
| Flash Point | 85oC |
| Autoignition Temperature | >220oC |
| Lower Explosion Limit (vol %) | |
| Upper Explosion Limit (vol %) | >5.5% (v/v) |
| Vapour Pressure | |
| Relative vapor density (air= 1) | |
| Aromatics | |
| Specific Gravity (gr/cm3) | 0.81 at 200C |
| Solubility | Soluble |
| pH (in 1% dispersion) | 7 |
| Pour point (at 0°C) | - 30 |
| Viscosity (at 0°C) (cSt) | 3 |
Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.
- Shipboard oil spill cleanup
- Deck and engine room spill removal
- Fuel oil contamination on ship surfaces
- Bilge and bunker spill treatment
- Oil spill response in harbors and ports
- Beach contamination cleanup
- Offshore platform spill treatment
- Refinery spill cleanup
- Storage tank area contamination
- Petrochemical plant maintenance
- Crude oil
- Fuel oil
- Diesel
- Lubricating oil
- Bitumen residues
- Kerosene and white spirit
- Determine spill area and type of oil.
- Apply emulsifier directly onto the oil slick using spray equipment.
- Allow several minutes for penetration.
- Natural mixing with water disperses the oil droplets.
- Repeat treatment if required.
- Spray emulsifier on contaminated surface.
- Allow to soak for 5–10 minutes.
- Scrub surface if necessary.
- Rinse with water or high-pressure wash.
- Apply product directly on oil deposits.
- Allow penetration time.
- Rinse using seawater or pressure wash.
- Rapid emulsification of oil and petroleum residues
- Strong penetrating action on thick oil layers
- Converts hydrocarbons into fine emulsions for easier dispersion
- Biodegradable formulation with low toxicity
- Effective on both fresh and weathered oil spills
- Suitable for marine and industrial environments
- Easy application using spray equipment or manual application
