Bilge Clean
SKU: RXSOL-10-1002-210
Category: Power Plant / Heavy Industries-37
Supply Location: Locations
Bilge Clean manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Bilge Clean at a competitive price from us. We have ready stock of Bilge Clean in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
RXSOL-10-1002-210 : is a powerful degreaser for engine rooms and fuel cargo tanks . It is non-toxic which makes handling easy . RXSOL-10-1002-210 is mainly breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.
Other Valuable Marine Chemical Manufacturer and Supplier in INDIA UAE OMAN:::
1 CHLORIDE LAMP TEST KIT Manufacturer and Supplier in INDIA UAE OMAN
2 TEST KIT FOR RESIDUAL CHLORIDE IN SEWAGE EFFLUENT 0-25ppm Manufacturer and Supplier in INDIA UAE OMAN
3 PH TEST KIT Manufacturer and Supplier in INDIA UAE OMAN
4 COOLING WATER NITRITE TEST KIT Manufacturer and Supplier in INDIA UAE OMAN
5 POTABLE WATER TEST KIT - FOR DRINKING WATER Manufacturer and Supplier in INDIA UAE OMAN
6 DESCALER Manufacturer and Supplier in INDIA UAE OMAN
7 BILGE CLEANER OR OILY WATER SEPARATOR DEGREASER Manufacturer and Supplier in INDIA UAE OMAN
8 AIR COOLER CLEANER Manufacturer and Supplier in INDIA UAE OMAN
9 GENERAL PURPOSE DEGREASER Manufacturer and Supplier in INDIA UAE OMAN
10 SAF ACID Manufacturer and Supplier in INDIA UAE OMAN
11 FOT-SLUDGE DISPERSANT/F.O. CONDITIONER Manufacturer and Supplier in INDIA UAE OMAN
12 FOT-LOW SULPHUR FUEL OIL CONDITIONER Manufacturer and Supplier in INDIA UAE OMAN
RXSOL-10-1002-210 is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering. It is highly recommended for heavy duty degreasing action .
Typical dose rate: 100 - 500 ppm (0.1 - 0.5 litre/m3 of water)
In a multistage bilge water cleaning system, RXSOL-10-1002-210 is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation It is highly recommended for heavy duty degreasing action , Depending on contamination 5-25% with fresh water.
